Setup Information for the RS-232 ComProbe II
The RS-232 ComProbe II is used for sniffing serial, asynchronous
RS-232 communications. The RS-232 ComProbe II is a finger-sized device
that connects to the analysis PC via a USB port.
The RS-232 ComProbe II is passive on the bus. Some serial analyzers
receive the data from one side of the circuit under test and retransmit
it to the other side. The RS-232 ComProbe II does not work that way. It
does not affect the communications on the bus. It passively collects all
data on the wire and passes it up to Frontline’s analyzer software.
End users typically have different RS-232 bus configurations.
Frontline includes accessories with the RS-232 ComProbe II which provide
great flexibility in tapping various RS-232 communication networks. The
RS-232 ComProbe II is shipped with:
- One 6-foot USB Cable.
- One RS-232 Y-Cable.
- One 6-foot RS-232 Extension Cable.
- Two 25-Pin to 9-Pin Adapters.
- One Cable Bag to Keep Everything In.
The RS-232 ComProbe II can be used directly in-line, or connected via
a combination of a provided Y-cable and/or the 6-foot RS-232 extension
cable. Some monitoring situations may require a pair of 25-pin to 9-pin
The various monitoring connection options are shown below:
Figure 1 - RS-232 ComProbe II Only
Figure 2 - RS-232 ComProbe II with Y-Cable
Figure 3 - RS-232 ComProbe II with Y-Cable and Extension
To learn more about diagnosing and troubleshooting industrial
networks download a
Order your copy of the NetDecoder analyzer today!