Real-time 802.15.4 / ZigBee Network View and Communications Debugging

See the Details - ZigBee Decoding
User selectable protocol level tabs in MeshDecoders Frame Display enables you to get at the information that you want to see fast. MeshDecoder decodes the ZigBee Cluster Library and with one click you can see the important data, the set point is 35 degrees or the switch is off. Some ZigBee analyzers do not decode the ZigBee Cluster Library. Frontline's MeshDecoder also provides you with Line Quality Information (LQI).

Communications Decoding - ZigBee

Frame 345: (Host) Len=35
802.15.4 MAC:
    Frame Control:
        Frame Type: Data
        Security: Disabled
        Frame Pending: No
        Acknowledgement Request: Yes
        PAN ID Compression: Yes
        Reserved: 0x000
        Destination Addressing Mode: 16 bit short address
        Version: IEEE Std 802.15.4-2003
        Source Addressing Mode: 64 bit short address
    Sequence Number: 253
    Destination PAN Identifier: 0x1aaa
    Destination Address: 0x00:00
    Source Address: 0x79:73
    Radio Supplied Information:
       Frame Check Sequence: 0x6e1f
        LQI: 255

ZigBee Network:
    NWK Header:
        Frame Control:
            Frame Type: Data
            Protocol Version: 2
            Discover route: Enable Route Discovery
            Multicast Flag: Unicat or Broadcast
            Security: Disabled
            Source Route Subframe: Absent
            Destination IEEE address: Absent
            Source IEEE address: Absent
            Reserved: 0x0
        Routing Fields:
            Destination Address: 0x00:00
            Source Address: 0x79:73
            Broadcast Radius: 10
            Broadcast Sequence Number: 230

ZigBee APS:
    APS Header:
        Frame control:
            Frame Type: Data
            Delivery Mode: Normal unicast delivery
            Indirect Address Mode: Not Relevant
            Security: Disabled
            Acknowledgement Requested: No
            Reserved: 0
        Destination Endpoint: Application 0x08
        Cluster Identifier: Temperature measurement
        Profile Identifier: Home Automation
        Source Endpoint: Application 0x08
        APS Counter: 176

ZigBee Cluster Library:
    Cluster (from APS layer): Temperature measurement
    Control: 0x00
        Frame Type sub-field: Entire profile
        Manfacturer field present: No
        Command is from: Client
        Disable default response: No
    Sequence: 67
    Command: Report attributes
    Attribute Report:
        Attribute: MeasuredValue
        Temperature: 34.0 C